DIY Corridor Repair
Any house or apartment begins with the hallway or corridor. This is the first room that we meet when we go to someone in the house. Both the status of the owner and the first impression of the home depend on the corridor.
In what sequence to carry out repairs in the corridor?
Repair of the corridor should be carried out in the last one, when repairs have already been made in the remaining rooms. Following our tips, you yourself can make the repairs of the corridor. And not to attract such expensive specialists to this process. First you need to select and choose materials. In this matter, you should rely to your taste and of course finances. Present in general the final result. All work should be carried out from top to bottom. Therefore, we start repairs from the ceiling. Then the walls, and the last to make the floor. If you have a small corridor, then it is better to arrange it in light colors. Since this will visually increase the room.
Preparation for the repair of the corridor
Before starting the repair, you need to thoroughly prepare. First you need to dismantle all old designs. If necessary, then do the wiring. To make it hidden, you need to cut out special channels for wires and holes for sockets in the walls. After these channels are filled with cables, they need to be covered with starting gypsum.
Repair process
We start repairing the ceiling. To do this, it needs to be cleaned of old paint or plaster. Think well exactly how you want to see your ceiling. It can simply be painted or made a plaster structure, or poured with wallpaper. After cleaning, you need to level the surface with gypsum and only after that can be painted. The advantage of painting can be called simplicity and a large selection of color scheme. It is also much cheaper than all other methods of ceiling decoration. If you decide to glue the ceiling with wallpaper, it is better to choose them with dense and light tones. They need to glue them on an even surface joint in the joint. Another simple way is to glue ceiling plates. For this method of finishing the ceiling, only slabs and glue are needed. Well, if you still wanted a ceiling from drywall, then you can’t do without an assistant. Moreover, you need to have special skills. First they mount a metal profile, you need to do this in level. Then they lie down with drywall and tighten it all with gypsum, and three times. Each layer must dry and it still needs to be polished. As a result, you will get a universal base on which you can put any finishing material.
After we made a stream came the turn of the door. Here you just replace your old doors with new.
The next step we repair the walls. This must be done on the basis of a design plan that you first invented. The walls need to be leveled with plaster or drywall. After this, the walls can be painted, or glued wallpaper. You can decorate them with decorative plaster, or use plastic panels. It is worth noting that all the materials for walls and for the floor must be chosen, because the corridor is a place of increased pollution.
Lastly, we make the floor. Its base needs to be leveled. To do this, pour a cement screed or self -leveling mixtures. To level the wooden floor use fugans. A very profitable and simple way to quickly make the floor is to cover it with linoleum or laminate. Tiles look good, but it needs to be chosen with an anti -slip effect. If you have chosen a laminate, then you need to take it durable. Since there are several classes of its strength. Most suitable for the corridor 33 class.
If you live in a private house or are going to make a renovation of a cottage, then the cost of such work will be much higher. This is due to the peculiarities of repairs in private houses, these features require special skills. But the specificity and sequence of repair work will remain the same.