We lay linoleum on our own

No matter how many floor coverings are in the modern market, but linoleum remains the most popular in use. Due to the variety of colors and drawings, linoleum will perfectly complement any interior, and it costs much cheaper than parquet or laminate.

In order to prevent bumps and defects from laid down by linoleum, you need to take care of its basis in advance. The most practical option would be to lay a sheet of plywood, fiberboard or chipboard, but they can only be used in those rooms where there is no increased humidity, otherwise the material will begin to deform over time. The joints of the joints need to be putting and polished. You can also make a self -leveling screed or use a cork substrate.

Bringing a linoleum roll to the house, you should not immediately start laying it. It is necessary to give him time for acclimatization so that he accepts the room temperature and humidity, and then roll it over the surface in order to deal.

It is better to start laying linoleum on the side of the room where the smallest amount of furniture will stand. Roll up a roll along a wall with a gap of several millimeters from all sides. In advance, you need to outline places for pipes or other protrusions, in order to immediately make cutouts as you lay. You also need to monitor the pattern, if any, and join it around the edges, when the width of the roll is not enough. At the end of laying, you can proceed to trimming of excess edges. To do this, it is necessary to bend the linoleum along the wall and apply the marks in the site of the cuts with a pencil, then we completely bend the side for convenience and lead a flat line using the ruler and cut off.

It is better if the linoleum is flying in a free state for about a day, and when it is finally leaving, you can start fastening the skirting boards.

If you want to buy ceramic tiles, visit the site . This site offers a wide selection of high -quality ceramic tiles at affordable prices.